SC-180 Cold Chamber Die Casting Machine
SC-180
- Specification
| Item | Unit | SC-180 | ||
|---|---|---|---|---|
| Die Locking Force | ton | 180 | ||
| Tie Bar Spacing (WxH) | mm x mm | 480 x 480 | ||
| Die Platen Dimension (WxH) | mm x mm | 740 x 740 | ||
| Die Closing Stroke | mm | 380 | ||
| Die Thickness | mm | 200~500 | ||
| Tie Bar Diameter | mm | 90 | ||
| Die Height Adjusting Speed | mm/min | 125(50hz)/150(60hz) | ||
| Plunger Tip Diameter | mm | 45 | 50 | 60 |
| Casting Pressure | kg/cm² | 1251 | 1013 | 703 |
| Casting Weight | kg | 1.13 | 1.4 | 2 |
| Casting Area | cm² | 120 | 148 | 213 |
| Injection Force | ton | 19.9 | ||
| Injection Speed | m/sec | 0.1~7.0 | ||
| Plunger Stroke | mm | 360 | ||
| Tip Protrusion | mm | 150 | ||
| Injection Port Position (Downward From Platen Center) | mm | 100 | ||
| Ejection Force | ton | 10.5 | ||
| Ejection Stroke | mm | 90 | ||
| Core Valve | set | 1 | ||
| Oil Cooler Water Port | inch | 1" | ||
| Die Cooling Water Port | inch | 1" x 1 in, 2" x 1 out | ||
| Die Cooling Adjustment Valve | pcs | 7 in ; 8 out | ||
| Required Cooling Water For Die | l/min | 25~45 | ||
| Required Cooling Water For Hydraulic Cooler | l/min | 30 | ||
| Operating Presssure | kg/cm² | 140 | ||
| Pressure Intensification | kg/cm² | 210 | ||
| Accumulator Pressure | kg/cm² | 135 | ||
| Hydraulic Tank Capacity | l | 350 | ||
| Motor (Power) | kw | 18.5 | ||
| Machine Weight | ton | 7.5 | ||
| Machine Size (LxWxH) | cm | 560 x 150 x 270 | ||
